Order Online :
1) Chooses product which you like , and click "add to cart"
2) Review your order and click "Checkout"
3) Input your address information and click "Submit the Order"
4) You can pay it now
Order by E-mail :
You can sent your order to our email : email@example.com
Please tell me the item number and quantity you want to buy.
For example :
2 Units HB-2168
1 Units GRA-0005
1 Units CAR-31
Then we will contact you by email , and We will help you to complete orders.
if you have any question, please contact us by email
We can accept the Master CARD
Please make the order on our website ,Then you can pay it online.
2. Bank Wire Transfer (Needs For 5 Days Usually)
Please contact us to get detail
We send to almost any destinations in the world. We always make sure we check all our watches and pack our watches properly, bubble-wrapped before we ship them out. All orders are shipped either EMS Express AirMail or DHL (To most EU countries)
We need to remind all customers that we need the following to ensure 100% delivery to you:
Full Address with postal code
Telephone number (This is important to ensure Guaranteed Delivery)
The shipping cost is 25 Euros for 1 watches.
5 Euros/piece must be added if your quantity more than 1 pieces.
1) Shipping by EMS or DHL
7-12 working days depending on destination and customs clearance
Online Tracking can track your package for you at different stages
We have NO CONTROL over the delivery after it is shipped
Customs clearance and delays may be unavoidable but there is nothing to worry.
EMS Shipping is the FASTEST and most RELIABLE
You can track the package here :
EMS : http://www.ems.com.cn/english.html
DHL : http://www.dhl.com (For USA Customer)
CORREOS : http://www.correos.es (For spain Customer)
CHRONOPOST http://www.us.chronopost.com/web/en (For France Customer)
2) Shiping by AIRMAIL
15-20 working days depending on destination and customs clearance.
Generally the safest method to enter into any country.
We have NO CONTROL over the delivery after it is shipped.
All orders are normally shipped from our warehouse within 48 to 72 hours of receipt of order. If there is a delay in your order, we will notify you by email. Delivery time will vary according to geographical location. We are not responsible for shipper delay as we have no control when item is shipped out.
Q: WHAT IS DIFFERENCE BETWEN THE SWISS REPLICA WATCH AND ASIA REPLICA WATCH ?
A: The quality of swiss replica watch is bettern than the asia watch.
The full function of swiss replica watch is same withe the Original one.
Q: WHAT IS THE FIRST THING I NEED TO DO UPON RECEIVING THE WATCH?
A: Upon receiving the watch, please wind it. It is likely that the watch runs out of energy during the journey. Wind the watch by turning the crown for about 15 - 20 full turns clockwise. If you know your watch is battery, there is no need to wind it. If your watch has a screw-tight crown, release it by turning it anti-clockwise until it is loose. Then you can wind it for 15-20 times clockwise as mentioned. Once it is done, you can screw it tight by pushing the crown inside. Turn the crown clockwise and screw it tight back at the same time. By doing a manual winding of the watch, your watch will start to tick.
Q: MY WATCH IS AUTOMATIC, WHY DOES IT STOP?
A: If your watch is a quartz version, it means that the battery has been used up. Please change the battery.
If it is an automatic watch, it is running on stored energy. It gains energy from human hand kinetic movement. When you do not wear it and it runs out of stored energy, it will stop. To make it tick again, you have to wind it for 10 - 12 rounds by turning the crown clockwise. To re-adjust the Day or Date back correctly, it depends on whether the crown is the one adjusting or it is recessed or button pusher. You can then adjust accordingly. For the crown, pull it out lightly once to adjust Date/Day (Most watches are like that). If you pull out the crown out twice, it will adjust Time. If it is a screw in crown, unscrew the crown anti-clockwise and follow the same instructions to adjust Date/Day and Time.
Q: HOW DO I SET THE TIME?
A: To set time, you need to unscrew crown anti-clockwise direction if you have a screw-in crown watch. You need to softly and slowly pull the crown out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the crown out with as little force as possible. You can feel a little "click"! Now you can set the time by turning it anti-clockwise. This would turn the minute-hour hands forward until you set the right time. When time is set, push the button back and screw the crown clockwise for a few rounds to ensure it is screwed back tight.
Q: HOW DO I SET THE GMT & LOCAL TIME?
A: GMT means Dual Time Zone and it usually use a 24-hour clock instead of a 12-hour clock we normally use. GMT can be set with two time zones. A local minute-hour hand time and a GMT (sometimes red) arrow second time zone.
To adjust time, please follow the instructions below:
1. Unwind the crown anti-clockwise softly and slowly until it loosen up. There are two steps of pulling out the button stem. Do not exert too much force here and please make sure you do it lightly and carefully.
2. STEP ONE is for setting the GMT second time zone. STEP TWO is for setting the local time. Pull one-step out is to set GMT and date by winding the button clockwise and anticlockwise respectively. Pull one more step is for setting local time. Pushing the crown inward one step will bring it back to GMT setting. Pushing it two steps will bring it back to normal position and you can wind it back clockwise while pushing it back softly to secure the crown onto the watchcase.
3. Set local time FIRST and then GMT SECOND time zone. When you set local time, GMT time will also be changed at the same time
Q: I HAVE A QUARTZ VERSION (BATTERY OPERATED) WATCH, WHEN DO I NEED TO CHANGE THE BATTERY?
A: A new battery will normally last for two years. Depending on time of the last replacement, you would probably need to change battery within two years.
Q: WHAT IS SCREW-IN CROWN? HOW IS THIS DIFFERENT FROM OTHERS?
A: A Screw-in crown will lock into the case of the watch when you turn the crown clockwise toward the watch case. It will tighten when it is screwed tight. Most Rolex watches use Screw-in crown. When you want to wind your watch, you have to un-lock the crown by turning the button anti-clockwise until you see the crown comes out of the watch a little bit, about 1.0 to 1.5 mm. Do not force the crown to come out cause it will easily break the stem link with the watch. When the crown comes out, you can then wind it, adjust time, date, day just like other watches. To lock it, slowly turn it and push it toward the watch until it is locked tight. NO need to apply extra force after it is tight! For most other non screw-in crown watches, you just wind it, adjust time, date, day without the need to un-screw the crown.
Q: WHAT IS A RECESSED PUSHER? HOW IS IT DIFFERENT FROM THE PUSHER BUTTONS THAT ARE NOT RECESSED?
A: Recessed pushers are button that are designed in a way that the button is inside the watch body, mostly for appearance purpose. Many times, there are too many push buttons on the watch already and making recessed pushers will help to save space and makes it more desirable in looks. Usually, recessed pushers are for setting date, year or day, etc. Use a ball-point pen to push the recessed pusher all-the-way and release fully will make it change accordingly. Repeat the process until you set the right information. Do not push half way or release half way, it will sometimes cause the gear to change half way and make it show the wrong information and it might damage other mechanical parts in the watch's movement.
Q: I HAVE A ROLEX DAYTONA WITH VALJOUX 7750B1 MOVEMENT WITH FUNCTIONAL CHRONOS, HOW DO I USE THE STOPWATCH FUNCTION?
A: The Daytona has chronograph buttons, which has a protective-screw lock for protection. This is a unique feature for Rolex Dayton
A: When you need to push the button, you need to un-wind the protective-screw to the level of the inside button, then you can push the button and press the button. Be sure to push it all the way and fully release it when pushing. Pushing halfway may cause it to stop half way and cause mechanical problems.
Q: WHAT IS A TACHYMETER AND HOW DOES IT WORK?
A: It is a scale on the dial. In fact, many sports version watches have it either on the rim or bezel. In conjunction with the second hand, it gives the speed of a moving object. A tachymeter takes a value determined in less than a minute and converts it into miles per hour. For example, a wearer could measure the time it takes a car to pass between mile markers on the highway. When the car passes the second marker, the second hand will be pointing to the cars speed in miles per hour on the tachymetric scale.